Видео

Any plans for more videos about this printer?

The print out like Italian tossed salad 🥗 😅

How is this possible😮😮. Im shocked. How???

I tried your speed test gcode generator but I cant reliably make diagonal moves with my Hevort SPAWD with motors at 24V/2A 😮‍💨 Sometimes it fails even at 10k what is starting point and highest I could get was 14k accs. Also I can't set "0" value for speed number of steps... Is ratrig vcore 4 using 48V?

They both looks so cheap and old technology. What a waste of resources of the two companies to release these two printers

I bought QIDI tech, boat was fine nice and star wars perfect 2 time but failed 4 time bad.. I frustrated what's wrong with QIDI.

Is that the new Zero G light weight filament? 😂😂

At 11:02, the recommended shaper differs between the two results. Wouldn't that mean that you have to compare the MZV result on the left with the ZV result on the right?

Ιf you listen closely youll find out that these are not steppers you hear but superchargers and do i also hear a supra ?

Why would I care about “upgrading “ a product that already does its job very well?

Wow. That is awesome

Buddy, no need rush for speaking, take your time and it will be more understandable👍

I printed one on my ender 3 pro printed as big as i culd took me 3 to 4 days

I always wondered how you did all this and then I jumped into the world of building a Mobius 4 and properly tuning it for high speed. I've even asked Steve from the team and he's not even really sure how fast they can be pushed as I'm sure he's maxing out his current motion system that it's using

Did you do any resolution tests? Either a standard resolution test or a comparative test with two objects printed on different printers?

Central UC. ẞtocton

Still watching, and congratulations on quitting smoking!

AI as taken over

Is that filament spiced with something?

He's printing a ʎɥɔuǝq

That extruder thinks it's an enderman

What I really really waiting for…is an open source reliable filament changer unit (MMU) on the market

More. MORE. MOOOOOOOOOOOORRREEEEEEE

My VC500 3.1 is watching me thinking about adding a hybrid system and a thicker bed plate

Nice Video! i recently built 2 vcore3 500 and i have to say that i really dont like how the gantry is connecting the belts to the head. It looks like this system is also present in the vcore4. The problem is that it is depending on the preload of the belts if the gantry is in 90 degree to the frame. In my opinion this is a very bad design decision since this moves over time and strains the components such as the linear rails and also the connecting abs parts. IMO the better solution is the way voron was going where all 4 ends of the belts are coming together on the frontside of the head.

Nhựa có kịp cứng không

Wo ist das filament das bei 1600mm/s noch druckbar ist

unbelievable! cool!

If I was a Bambu douche, I would probably say "that's just another Bambu copy" lol You're brave for putting your hand near that thing.

the speed and acceleration are out of this world, congratulations :)

Always enjoy your rat rig videos, not just pure speed on the V0

I don’t see the point oh getting something like this. Either make diy or get something that works out of the box. But this is worst of the both worlds. Crappy kinematic components (cheaper bearings, bolts and nuts, poor electric wirings, sags and bends within frame geometry.) why I should spend that much money gor this trash?

I was really disappointed about the space inefficiency of the V-core 4. Namely having rails on top/bottom, but the belts inside the square of the gantry, when you can gain space by having rail AND belts on top, like HevORT or Rook.

Plastik bombe 😅

this can't be real

😮

It's really bad that klipper still does not allow separate x and y accelerations even with 2 separately developed pull requests and numerous discussions on github, discourse, reddit, discord, etc. Lately they also broke the limited_cartesian code that Piezo developed, so I've gone back to marlin. If I can get 15k on X and 8k on Y and I'm printing a thin object (ex. airfoil), I'll take the speed boost over Klipper features every time.

Excellent video! That printer looks awesome. I'd love to see a head to head comparison with the VZ bots AWD

I am probably being picky but the 3D printed parts on the printer are very rough looking.

Good video, thanks! I've been playing with 3D printers around 10 years and... I got my X1C, brought it home, unpacked it, set it to calibrate and immediately printed a perfect Benchy. Let’s skip the 20 minutes that the printer did something itself - for me it looked like “5 minutes of assembly and you’re already printing something with perfect quality.” A completely different level of the game.

How much?

What PLA are you using :D

Wow….I am making 500x500 voron trident custom printer but never think like this way. Is it better than one nema 23 stepper motor?

That’s the case

Great review; I love your nit-picking. I placed my VC4 500 hybrid order on the 2nd of May, so have some time before the kit arrives. I've subscribed to your channel and await more videos on this exciting printer!

Great review my friend. Your attention to detail and honesty is much appreciated. Very glad to hear they are going to sell a fully assembled one for those of us who look at printers as a tool, no different than my table saw. I will be keeping a close eye on this printer to see how it evolves and I can easily see myself purchasing one of the assembled versions. I heard you say you love printing in PETG, have you tried Elegoo Rapid PETG? It is about all I print with now unless I need a color they don't have. I am able to print it perfectly with the same profile I use for Rapid PLA on my Qidi XMax 3. Best of all it is very reasonably priced. Looking forward to your next review of the VCore 4.

Я когда забыл сделать домашку

Love it

I’m surprised they didn’t upgrade to the orbiter 3.0 with included filament run out sensor…